AT4400 – Skaljakke BreatheDry sort – L

AT4400 – Skaljakke BreatheDry sort – L

The BreatheDry® Waterproof Jacket/smock is a lightweight technical garment with an array of features that have been created with the arborist in mind.

As a fully waterproof and breathable jacket, the Arbortec Waterproof Jacket conforms to EN343 Class 4 standards and incorporates an increased back length to shed water. The garment features a high collar with a waterproof zipper, inner placket, and neck protector.

KEY FEATURES: 

• Pockets: 3 waterproof pockets, 1 upper chest pocket, and 2 lower pockets.
• Hood: zip-off or storeable collar, helmet-compatible with a wired front peak.
• Vents: BreatheDry® vents and pit zips.
• Zip sides: ease of access to trouser pockets, etc.
• Taped Seam: all seams taped to increase weather resistance.
• Cuffs: tailed storm protection with Velcro adjustable, and Lycra thumb loops.
• Length: longer back for water runoff, long sleeve length for high reaching.
• Colour: Black

PRODUCT DESCRIPTION:

Inside the collar is a large adjustable hood that has been designed to fit over a climbing helmet. The hood has a wired peak, bungee volume adjuster drawcord, and a large hook and loop storm flap.

The sleeves are of generous length and have inner soft cuffs with thumb loops. Additional features include hook and loop tab fasteners to keep the cuffs watertight.

A large breast pocket with a waterproof zipper can hold a smartphone, and a further large pouch pocket can be accessed by long side zippers. The pouch pocket also acts as a ventilation point with mesh panels on the inside.

Further ventilation ports are concealed beneath zippers in the armpits and an access zipper at the bottom of each side of the garment, which is useful when wearing a climbing harness.

The Breathedry Waterproof Jacket is also available in high visibility orange and yellow, which conforms to EN 343:2019, Class 4,4 (Waterproof and Breathability)

SAFETY STANDARDS:

• BS EN 343:2019 Classes 4, 4, X
• BS EN ISO 13688:2013+A1:2021
• Waterproof & Breathable 

MAINTENANCE:

Our garment fabric has a solid structure that physically stops water from passing through the membrane. The fabric breathes by absorbing and dissipating sweat through the diffusion of water vapour molecules. When the membrane becomes clogged, the garment will stop performing to the best of its ability to ensure it retains its extreme and breathable properties.

if the fabric membrane becomes clogged with grease, dust, and dirt, it is very likely to allow moisture in and leak.

Arbortec recommends washing your smock with NikWax TechWash following the guidelines on the NikWax packaging, to clean off the grease and grime, followed by a re-wash with NikWax TX. Directly to help restore water-repelling and receive Breathability. Nikwax products are available from our Stockist or on this link :

Care Products